Skip to main content

904 356-JOBS (5627)

904 356-JOBS (5627)

Who Will Build Florida? (Courtesy of Florida Trend) — Alex Myers knew early in life that college was not the right path for him. He was a decent student — all As and Bs — but school did not command his interest.

On a whim, as a freshman at Pasco High School in Dade City, he entered the school’s electrical program. Over the next few years, he learned basic construction concepts, electrical theory and how to build and wire a house himself. He credits the program — a four-level course offered by the National Center for Construction Education and Research, based in Alachua — for keeping him in high school.

Upon graduation at age 18, Myers started as a second-year apprentice with Altamonte Springs-based Tri-City Electrical Contractors. His beginning pay was $14 an hour. He finished his last three years of trade schooling and received his journeyman’s license, bumping up his pay along the way. Eventually, he worked his way up to assistant project manager, where he now makes close to six figures a year.

“This has put me in a very good financial position because I don’t have the debt of a four-year degree,” says Myers, who is now 26. He purchased his first house when he was 19 — and then his second house, his new truck, his four-wheelers and boats. “Let’s just say 14-year-old Alex would be proud of where I am today.”

Myers is part of the next generation entering the construction workforce. And he’s one of relatively few: For every five workers who retire in construction and other skilled trades, only two new workers step in to replace them, according to the U.S. Department of Education. That spells trouble for a sector in which 41% of the current labor force is expected to retire by 2031 — from superintendents and project managers to skilled tradespeople such as electricians and plumbers.

The aging workforce — plus regional disruptions from immigration enforcement actions (see “Immigration Ripples,” page 62) — has narrowed Florida’s construction talent pool during an ongoing period of growth. As of June, the Sunshine State reported around 655,000 construction employees. By some counts, the state needs a projected 669,000 skilled tradespeople to meet booming demand through the end of this year.

To address the shortfall, industry professionals are trying to catch up on a missed generation of recruits. They’re heavily investing in training programs and adopting new technologies — from sci-fi-inspired exoskeletons to robotic printers — that can help fill remaining gaps. The goal is to avoid project delays and rising labor costs in an industry that accounted for about 6% of Florida’s GDP in 2025.

“Florida’s future is being built right now, and construction is at the center of it. None of that is possible unless we have our workforce. … It’s critical that the focus is on that every day.” — Richard Backa, the 2026 chair of the Associated Builders and Contractors of Florida

“One thing that will cause a downturn faster than a lot of other things, believe it or not, is not having the workforce to build the projects they want to build. It’s an ongoing fight,” says Richard Backa, the 2026 chair of the Associated Builders and Contractors (ABC) of Florida, the state’s largest commercial construction association. “Florida’s future is being built right now, and construction is at the center of it. None of that is possible unless we have our workforce. … It’s critical that the focus is on that every day.”

GENERATION GAP

From her days in public policy, including a 14-year stint on the Leon County School Board, DeeDee Rasmussen remembers a resounding state-led directive dating back to the 1990s: Everybody should go to college.

In 1997, the Florida Bright Futures Scholarship Program began nudging more high school graduates toward postsecondary education. High schools started competing for college placement rates, Rasmussen recounts, and prioritizing four-year university pathways. In 2008, Florida’s community colleges began transitioning into state colleges with four-year degree options, with some schools shifting away from career and technical education.

Rasmussen admits she was part of the cultural shift. She even dressed her three-year-old in a Harvard sweatshirt. Now, as president and CEO of ABC North Florida, a chapter that covers Panhandle counties into Tallahassee, she sees the lasting effects of that emphasis on the state’s construction workforce. Like many professionals in the sector, she believes the push toward four-year degrees has left a generational hole. “We don’t have the pipeline that we might have had,” she says.

The Great Recession was the nail in the coffin: Between 2007 and 2012, as the housing bubble burst, Florida shed nearly half its construction employees.

Burdened by stigmas about the field’s physical demands, on top of the policy push toward four-year degrees, Florida’s construction employment has struggled to climb back to pre-2008 counts. Today’s workforce represents 95% of the 2006 high — even as the state has grown into one of the most active construction markets in the country.

All the while, the existing workforce has aged. Statelevel demographic data is sparse, but nationally, from 2011 to 2024, the number of construction workers 55 and older rose 70%, according to the Maryland-based nonprofit Center for Construction Research and Training. By 2024, more than a fifth of all construction workers were 55 or older. The average age of a construction worker was about 45 years old, three years older than the average U.S. worker.

In 2026, just 6% of young adults expressed interest in a career in the construction trades, according to a National Association of Home Builders survey. Without natural replacement, the workforce gap grows wider.

“Our industry has had challenges for a long time because we’re a society and a culture that just really hasn’t focused on the blue-collar jobs,” says Peter Dyga, president and CEO of ABC Florida East Coast. “That’s a conversation I had 30 years ago that we’ll probably be having 30 years from now: Who’s picking this as an industry?”

Florida’s construction sector is desperately trying to lure younger talent into hard hats. Industry professionals say that starts with changing the perception that a “successful” career depends on paying for a four-year degree.

Instead, they emphasize craft training programs such as registered apprenticeships, which are employer-sponsored “earn while you learn” models that combine supervised on-the-job training with classroom instruction for ages 16-plus. Apprentices are paid employees of the participating employers, which pay for the training and shift the debt burden of traditional schooling away from students. Currently, more than 2,100 employers across Florida train apprentices in 144 occupations, with trades-related occupations being the most popular apprenticeships.

Industry recruiters highlight the career’s return on investment: Starting wages for apprentices start around $9,400 a year, while exiting wages can surpass $104,000. After completing an apprenticeship, most trades — including electricians, HVAC technicians, millwrights and plumbers — offer annual salaries above $70,000. Depending on the gig, tradespeople can pull in six figures a year. (Want to make $155,600 your first year on the job? Consider becoming a power line repairer.)

“We missed a generation of folks that were going into the trades. Now we’re seeing a little bit of a rebound there. … We’re seeing a lot of folks rediscovering the trades as lucrative career opportunities,” says Steve Cona, the president and CEO of ABC Florida Gulf Coast. “But obviously we have some catching up to do.”

WORKFORCE REBOOT

Within the Northeast Florida Builders Association — the largest homebuilder association in the state and fifth-largest in the nation — President Scott Brannock remembers when the region pushed pause on investing in the trades. Local universities “wanted to focus elsewhere,” he says, abandoning any emphasis on alternative career paths, such as the trades, around 2015.

The association took on an apprenticeship program itself. Now, with annual investments of $7.5 million, the program has grown to more than 500 apprentices learning how to be carpenters, electricians, plumbers and HVAC technicians. In March, it moved into a new 43,000-sq.-ft. training facility in Jacksonville with lab space and classrooms. (The superintendent on the construction job? A recent graduate of the very same apprenticeship program.)

Brannock now gets hordes of calls from parents begging for their kids to dive into the construction industry. He hopes the apprenticeship program will grow to 700-plus students and eventually add satellite campuses.

“You know who the most successful people are in Jacksonville, Florida? In the trades.” — Scott Brannock, Northeast Florida Builders Association president

“You know who the most successful people are in Jacksonville, Florida? In the trades,” he says. “The career opportunity not only for just getting into a job — which is better than most right now — but the upside to where that could take a lot of these individuals right now. … The sky’s the limit.”

The program’s growth coincides with a renewed statewide push toward the trades.

From 2024 to 2025 — the most recent data available from the Department of Education’s annual Apprentice Report, released in January — Florida’s 414 registered apprenticeship and pre-apprenticeship programs trained a total of 24,919 students. It marked a 70% increase in registered apprentices and a 57% increase in registered apprenticeship and pre-apprenticeship programs since 2018-19. Florida now ranks seventh among all states and territories for the number of new apprentices and ninth for the total number of active apprentices.

Other construction training pathways are seeing upticks in interest, too. According to the latest data from the National Student Clearinghouse Research Center, national enrollment at trade-focused, two-year institutions has surged nearly 20% since spring 2020, now accounting for 19.4% of all public two-year college enrollment.

To meet demand, some Florida trade training is being fast-tracked. The ABC Central Florida chapter partners with local educational institutions, such as Seminole State College and Orange Technical College, to put high schoolers through one-year trade programs. It also offers specialized training according to industry needs — like a two-year apprenticeship program in interior carpentry in demand among Central Florida’s theme parks, hotels, hospitals and office buildings. It has done the same for plumbing, pipefitting and welding.

“We don’t have eight to 10 years (for training) anymore, so we’re having to get really creative with what can we do to train people faster,” says Michele Daugherty, president and CEO of ABC Central Florida. “I’m having high schools and middle schools call me on a daily basis saying, ‘How do we bring (this training) back into our schools?'”

The tide appears to be shifting: On average, the share of new hires aged 18 to 25 in trades industries has increased around 4% annually since 2019, according to California-based HR and payroll platform Gusto. Generation Z represented 25% of new skilled-trade hires in 2024.

For apprenticeships through ABC Florida — the largest provider of apprenticeships in the state, accounting for more than 20% of the state’s total apprenticeships — the average participant age hovered around 28 years old before the COVID-19 pandemic. Now, that age has dropped to around 25.

“Now we have a chance to, with this growth, take that institutional knowledge of superintendents at 55 years old and try to share it before we have that gap,” says Brandi Faison, former director of education and workforce development for ABC North Florida. “There’s been so much more respect for the industry, and that’s been really impactful.”

WORKING SMARTER

MetroPower is first and foremost an electrical contractor serving Georgia, Alabama and North Florida. The company also employs millwrights, plumbers and workers in the fire-protection and low-voltage markets. And, uniquely, some employees dabble in multiple trades.

Multiskilling, as Vice President of Industrial Construction Todd Stevens calls it, is when one employee is trained across multiple disciplines. An electrician, for example, may also be a certified welder. Multiskilling also refers to a collaborative model for construction projects, where different trades work together on job sites instead of mobilizing separately.

For MetroPower, which is struggling to fill positions up to leadership roles, multiskilling in either sense means greater efficiency, shorter project timelines and lower costs. The company actively promotes cross-trade training and workers stand to gain higher pay for the added skills. Around 10% of its 750-some employees are multiskilled.

“We don’t have eight to 10 years (for training) anymore.” — Michele Daugherty, president and CEO of ABC Central Florida

“We don’t have to bring in two trades. We can bring in one person that has the skill set,” Stevens says. “We’re not sending multiple people in and not having to duplicate costs. … It’s all done as part of one effort rather than multiple.”

“All those technologies are technologies that we’re really exploring, experimenting with.” — Melissa Tapanes, president of the Builders Association of South Florida

Without enough workers, multiskilling is one more tool in the toolkit to help meet demand, especially as construction and extraction employment in Florida is expected to grow by 12% from 2026 to 2034.

Another rising technique is prefabrication, when building components are constructed offsite and then transported to a construction project for quicker assembly. The process requires fewer hands, saves time and money, and is generally safer for workers. It is best suited for larger jobs with lots of design repetition, such as hospitals, hotels and dorms.

“It allows you to help the workforce gap because you have work going on a lot sooner than you would in a traditional building. … We’re going to need a lot of that,” says Tracy Hunt, executive vice president and general manager for Skanska’s Florida building operations. The company is using prefabrication to build the Lee Health Fort Myers hospital campus, which is expected to open in 2028.

Technology also plays a key role in closing the construction workforce gap.

Consider exoskeletons — wearable mechanical devices that support workers’ upper bodies by redistributing carried weight and providing extra lifting power. With a starting retail price around $1,000, the technology can help protect and retain the aging construction workforce. It might also improve the recruitment of workers who traditionally face physical barriers in the industry, including women or people with disabilities.

Virtual reality headsets give apprentices and trade school students opportunities to test their comfort with tasks such as working atop a skyscraper or within a confined space before they touch tools. On job sites, the devices can help visualize project plans to confirm accuracy and quality control.

There are also robotic printers that, upon receiving a floor plan, map layouts directly onto building slabs using different colors and line variations. The technology guides construction and helps prevent mistakes, creating savings through precision. It also allows last-minute design tweaks to be incorporated without causing delays.

Georgia-based Batson-Cook Construction — which has offices in Jacksonville, Winter Park and Tampa — has been using a robotic printer for about two years. “It’s hard to quantify, realistically, the savings. We just know that we are better off. … Each mistake, you’re talking about thousands of dollars,” says senior virtual design and construction manager Wade Martin, who is based in St. Augustine. “I would say (Florida) is probably leading the country on using this thing. … We’re taking it and changing the game.”

Even artificial intelligence has a place in the hands-on construction sector.

According to a 2025 survey from Maryland-based tool manufacturer DeWalt, 90% of U.S. construction professionals believe AI will be indispensable within five years, yet only 8% currently use it on the job. That’s why, this year, DeWalt launched a pilot program with ABC Central Florida’s Innovation and Technology Center to deliver jobsite-relevant AI training for the next generation of skilled trades professionals.

“All those technologies are technologies that we’re really exploring, experimenting with,” says Melissa Tapanes, president of the Builders Association of South Florida. “It is allowing us the opportunity to possibly deal with the blips of the typical cycles with more confidence and with more certainty of moving forward with timelines.”